Sail comfortably in the thermals, take off with the rubber rope and take part in an RES competition or celebrate brisk aerobatics - all this is possible with "Triple". This completely newly developed model concept offers a shapely fuselage with a V-tail (either as a glider or as an electric glider - both versions are included in the kit) and three different wingspans. All wings can be attached to the fuselage as desired. Completely without tools, with strong magnet security. So a quick change is also possible on the airfield. "Triple speed" has a wingspan of 178 cm, a simple V-shape and long ailerons. The profile has a straight underside, allowing for rapid flight and superb gliding aerobatics. "Triple RES" has a wingspan of 199 cm and a higher V-shape than the "Triple thermal". In accordance with the RES competition regulations, the model is only controlled via rudder, elevator and spoilers. "Triple thermal" has a wingspan of 255 cm and is equipped with ailerons and spoilers. The profile is designed for thermal flights and gives the model good-natured and powerful flight performance.
With its slim design, the glider hull offers the best aerodynamic properties. The electric hull is only a little wider in the front area, can comfortably accommodate 28 mm external rotor motors and offers space for a 3s LiPo up to approx. 2,500 mAh.
Common to both fuselages is the detachable canopy with magnetic lock and a fuselage cover on the underside, behind which the servos for the V-tail are hidden. All models are completely made of wood and thus follow the tried and tested principle of model building at aero-naut. The hull is constructed from poplar plywood and balsa. The innovative plug-in system enables quick and distortion-free assembly. The V-tail is also assembled from ready-lasered parts and glued to an extra mounting bracket that is included. The wings are built in rib construction, have continuous pine spars and boxing with grooves, so that assembly on any flat building board is quick and easy. The trailing edge planking is also grooved so that nothing can go wrong with the position of the ribs.
The kit is also ideal for youth work and for joint building projects in clubs. The model kit contains all the laser-cut wooden parts to build the model, pine spars, rudder linkages and Bowden cables, various small parts.
Detailed illustrated building instructions in the proven aero-naut 3D style lead to quick building success.
You can find suitable drives for version E-gliders at the bottom of this page. A 3s LiPo with the dimensions up to approx. 80 x 35 x 25mm is best suited as a battery, since this battery size can be installed directly in the compartment provided at the center of gravity. Larger batteries also fit under the large canopy.
Servo up to size 11.5mm for ailerons, up to size 10mm for airbrakes