Topmodel Agama 2.35m

Topmodel Agama 2.35m

Agama is a lightweight, high-performance electric glider controlled in all axes with a classic tail arrangement (rudder and removable elevator). The large wing area and the profile used give the model absolutely perfect flight characteristics in thermal conditions and in the evening calm. At the same time, it has solid wind penetration and very good maneuverability. Full mechanization of the wing in the hands of an experienced pilot can ensure a wide range of settings for using all properties. Landings when using butterfly mix are a treat. Agama has a two-piece structural wing with an AG profile. The wing is attached to the fuselage with two screws, which, even with a horizontal tail, is easily dismantled and stowed for better transport to the airport. The precisely processed fuselage is made of colored laminate. It is reinforced with carbon fabric, has a cut-off nose, which is ready for gluing an engine bulkhead and installing a Ø 28mm engine with a Ø 32mm cone and a folding propeller. The rear part of the fuselage is made of a conical tail tube made of carbon fabric. The carbon wing spar (made of carbon stocking) together with the carbon leading edge give the wing sufficient strength and rigidity. The wing connection is ensured by an aluminum connector filled with carbon. The elevator and rudder have a main spar and leading edge made of carbon and their control is ensured by servos located under the wing. Agama will be popular not only with fans of competitive flying, but also with all pilots who like to enjoy pleasant and fun flying. Truly excellent flight characteristics will amaze you and you will look forward to every next flight!

Kit contents:

• Lightweight fuselage made of tinted fiberglass reinforced with carbon with a cut-off tip to Ø32mm and a carbon tail spar
• Fiberglass canopy
• Two-piece balsa structural wing with carbon tube spar and leading edge and carbon-filled aluminum coupler covered with foil
• Balsa construction tail surfaces, supplemented with carbon spar and leading edge, all covered with foil
• Stickers cut with a plotter with transfer foil
• Top quality accessories ( motor mount, servo covers and holders, rod and ends, control horns, screws, nuts, hinges, tape for gluing ailerons and flaps, ...)
• Complete assembly manual with step by step illustrations

Anbefalt vingtrekk: Vingetrekk for Agama 2.35m - RC Modellflysport